Who makes those control arms??
Who makes those control arms??
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I had them custom made from Rusty's! If you want I can get you the part numbers tomorrow for the two ends. Then you will have to call and tell them what you want!
Sent from my DROID RAZR using Tapatalk 2
Lots of good things happening lately!
I look forward to it !
2010 Limited > 5.7 > Pearl Black > QDII > 4"¯ Superlift w-SSR > Bilstein HD Struts + 1/4" spacer > RCV cv Axles > JBA 6" Springs + Matt's 1/2" Spacer > BDS adj LCA > 285-65-18 Nitto Trail Grappler MT's > Moto Metal 951 > K&N CAI > Flowmaster 50 > 4xGuard-Front/Belly skids + Grill Hoop w/ Front Receiver + Rear Diff. Guard > PIIA 520 ATP > Front Camera > Steel Armadillo's Rear Bumper/Tire/ Blitz Carrier/Super Sliders +Secure Console > Dual Batteries > OBA > JKS Rear-JBA Front Discos > FlashPaq
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
I know it has been longer then planned to update! Sorry!
So first of all I found a cheap set of Moabs for $100. Pained and installed
Then i did not care for my SL rear springs! So I bought some JBA 6" lift rear springs. Painted and installed!
LIttle later I bought some JKS quick sway disconnects. With these I had to make them longer then the SL ones> At fully extended the JKS ones were at 12 1/2" and Sl was at 14 1/4". I needed 16". I bought some allthread and some couplers. I had to tap the internal threads to 11 thread count, and tap half of the coupler as well. Some lock tite and everything was good!
Then went out to Eagle Rock! Still working videos Sorry. Not good at his computer stuff! Some scrapes from the trip.
Last edited by stites-xk; 04-23-2013 at 03:42 PM.
Some more scrapes!
Next was the control arms and new track bar. There is a pic up a couple of post. Then i painted them!
Then with some help from some awesome members! I got a QDII front diff, and most of the parts I need! The rest will be here tomorrow! So hopefully this weekend and if not next weekend for sure I'll do the swap!! Then i'll be locked front and rear!!
I think that is about it for now. I'll keep you updated!
nice
PJMJR508
(Happy Jeep)
How is the rear locker? Still making a lot of noise?
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 1 users browsing this thread. (0 members and 1 guests)