I have a good signwriter as well, he did the logo in full cut vinyl, so there is no backing. But it wasnt easy apparently!
I have a good signwriter as well, he did the logo in full cut vinyl, so there is no backing. But it wasnt easy apparently!
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
Yeah, in something "complex" like this, with a lot of little crevices, like the drops of mud, etc it is really hard to have them done in vinyl. That is why I was thinking transparent. I will see what I find and how much.Originally Posted by valpacer
07 WK Limited, 3.0 CRD, QDII
For an easier design, we could just replace the tire tread with horizontal lines. It sounds vague, but check out the maniac4x4 aussie Commanders on their website. The third picture on the page's slide show has a "Team Jeep" sticker in the XK's window with a horizontal line design we could replace the tire tread with.
http://maniac4x4.co.za/commander.php#
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
That would not look as cool though.
07 WK Limited, 3.0 CRD, QDII
I think it can be done... the key is putting the decal in during the summer; put it on in the morning and let that baby bake allllll day in the sun before peeling off the backing to make sure all those small sections adhere really well to the window.
I've put some pretty cool skiing decals on that had similar designs with snow splatter and long thin elements (skis/poles).
Any update on if any decals will be made? I think we have enough members willing to purchase?
^^^^
I would buy one.
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
There are currently 2 users browsing this thread. (0 members and 2 guests)
Posting Permissions
Reply With Quote