I don't know the answer to your question. But when did they make a HEMI Commander with QT II. Unless I knew that and just forgot!
I don't know the answer to your question. But when did they make a HEMI Commander with QT II. Unless I knew that and just forgot!
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I just got done doing some HW and will look them up. Eyes are kind of blurry from messing around with matlab code so im probably not going to edit as nicely as i've done in other threads
FYI you can download the 05 WK service manual here: https://dl.dropbox.com/u/24438380/2005-WK-SM.pdf
Then hit Control-F to bring up the search, and type in the DTC to jump straight to the code page
You sure those are the right codes?
Those are indeed the codes.......... I can't find much on the internet pertaining to them. I am going to grab a scan tool from work tomorrow and do an indepth read. I hope it was just a glitch somewhere in the OBD system.
Old: 2006 Base, 4.7L, QT-II
New: 2010 Sport, 5.7L, QT-II, Front Tow Hooks, Tow Package and 7 pin Mopar Harness ( Spliced 4 pin into harness), Mopar Skid Plates
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I didn't know they had QT-II until I bought it. I was hoping HEMI = QD-II but it was an option for 2010. I think it was standard on the Limited. As for the DTC's, I reset them and am waiting for them to come back.... Forgot to go into work and grab the scan tool today, my brain is on holidays too.
Old: 2006 Base, 4.7L, QT-II
New: 2010 Sport, 5.7L, QT-II, Front Tow Hooks, Tow Package and 7 pin Mopar Harness ( Spliced 4 pin into harness), Mopar Skid Plates
So the scan tool didn't really shed any light on the problem. All sensors are functioning OK and nothing seems out of order. So it's intermittent and my scan tool wont allow me to actuate any system functions. Will wait and see what turns up.
Old: 2006 Base, 4.7L, QT-II
New: 2010 Sport, 5.7L, QT-II, Front Tow Hooks, Tow Package and 7 pin Mopar Harness ( Spliced 4 pin into harness), Mopar Skid Plates
There are currently 1 users browsing this thread. (0 members and 1 guests)