Do you by chance have installation instructions? I am not sure if they came with any but if they did I have mis-placed mine. I cannot remember if there is a right and left and which side is top & bottom.
Do you by chance have installation instructions? I am not sure if they came with any but if they did I have mis-placed mine. I cannot remember if there is a right and left and which side is top & bottom.
Jon, I don't have installation instructions and they didn't came with it. You have to install them with the snap ring facing down (as shown on the picture above). There is a left and a right arm. When you compare geometry of the HD UCA's with the stock UCA's I have to say they have a better clearance angle installed the opposite way. Lay a HD UCA on top of a installed stock UCA and you'll see what I mean.
2007 4x4 Limited, 5.7L Hemi
Mods:
OME HD Lift, 1/4" Rusty's strut plates, HD UCA's
American Racing ATX Mojave wheels with Goodyear Duratrac 265/70 R17 tires
Mopar skid plates & sport utility bars, 12" billet antenna
2007 4x4 Limited, 5.7L Hemi
Mods:
OME HD Lift, 1/4" Rusty's strut plates, HD UCA's
American Racing ATX Mojave wheels with Goodyear Duratrac 265/70 R17 tires
Mopar skid plates & sport utility bars, 12" billet antenna
I received a request for information on this item so I am bumping the thread.
There are currently 1 users browsing this thread. (0 members and 1 guests)