HD UCA's

[bruijr]

Recently I was in contact with HM Engineering to order some new pins for my HD UCA's. While talking with them they told me they still had some HD UCA's for the Commander in stock but nobody to sell these for them.
I jumped in to make these available to others in need of some more Heavy Duty parts.

Currently I have two sets at home ready to be shipped and an other six sets coming in the future (have some missing parts which are being fabricated as we speak).

These are the exact same HD UCA's GetLost4x4 used to sell on the "other forum".

I sell them for USD $575 shipped within the US. I will ship worldwide but higher shipping cost are involved so PM me for shipping rates outside the US.
They come with stainless steel pins and grade 8 nuts (see pictures below).

PM me for more information.

[LWM]

It is good to see more of these availble, Thanks for taking on this item!

[wrenchin hobo]

Do the pins have to be replaced often? And I'm guessing these help significantly with alighment issues with a lifted xk?

Thanks for offering these.

J

[bruijr]

Do the pins have to be replaced often?

So far I know of two situation that somebody needed new pins. One guy because the shop who installed the UCA's mounted them upside down. That way the pins will interfere with the bearing housing resulting in bended pins. The other who needed new pins was me. I bought my HD UCA's used and the owner before me put some very heavy use on them. Right Tom.....??? I've seen them going down, then up and down again the Devil's Staircase in Sedona.
http://www.youtube.com/watch?v=dH5UfIPPRII

[Sal-XK]

wow that seems expensive how much are the stock ones?

[HueyPilotVN]

I think that when we did the group buy for the UCA's they were over $600. Phunkeydude was not just going up and down that staircase, he was jumping from the top like Thelma and Louise.

[bruijr]

wow that seems expensive how much are the stock ones?

That's not too bad. Stock UCA's sell for almost USD $200 a piece without shipping. Check: http://www.justforjeeps.com/frupcoar.html
I don't know the price the dealer asks, but it's likely to be more than the once on the site above.

Simular kits for the Toyota Tacoma or Nissan Pathfinder sell for USD $650 and more.

[LWM]

Mine are still in the garage, I guess I need another wrenching party so I can get them installed.

I copied your buy/sell thread and moved the discussion over here so the ad can remain an ad only, if you want to bruijr you can link back to this thread.

[bruijr]

Mine are still in the garage, I guess I need another wrenching party so I can get them installed.

Jon, my UCA's have to get powder coated. Once they're done we can install both yours and mine. Maybe a BBQ after that at my place.....

[brendon]

I would love to have a set of these, but I have too many other irons in the fire right now...