That's not too bad. Stock UCA's sell for almost USD $200 a piece without shipping. Check: http://www.justforjeeps.com/frupcoar.htmlOriginally Posted by Sal-XK
I don't know the price the dealer asks, but it's likely to be more than the once on the site above.
Simular kits for the Toyota Tacoma or Nissan Pathfinder sell for USD $650 and more.
2007 4x4 Limited, 5.7L Hemi
Mods:
OME HD Lift, 1/4" Rusty's strut plates, HD UCA's
American Racing ATX Mojave wheels with Goodyear Duratrac 265/70 R17 tires
Mopar skid plates & sport utility bars, 12" billet antenna
Mine are still in the garage, I guess I need another wrenching party so I can get them installed.
I copied your buy/sell thread and moved the discussion over here so the ad can remain an ad only, if you want to bruijr you can link back to this thread.
Jon, my UCA's have to get powder coated. Once they're done we can install both yours and mine. Maybe a BBQ after that at my place.....
2007 4x4 Limited, 5.7L Hemi
Mods:
OME HD Lift, 1/4" Rusty's strut plates, HD UCA's
American Racing ATX Mojave wheels with Goodyear Duratrac 265/70 R17 tires
Mopar skid plates & sport utility bars, 12" billet antenna
I would love to have a set of these, but I have too many other irons in the fire right now...
Sounds like a good idea!
Thats definately the going rate for a set of HD UCA's.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Does that mean you're going to take one set off my hands?
2007 4x4 Limited, 5.7L Hemi
Mods:
OME HD Lift, 1/4" Rusty's strut plates, HD UCA's
American Racing ATX Mojave wheels with Goodyear Duratrac 265/70 R17 tires
Mopar skid plates & sport utility bars, 12" billet antenna
Thought I would give you a bump on these and see how many you have left for sale! Maybe the Arizona guys want to pick some up and do a wrenching party to install them all in one day.
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Unfortunately no. I think im going to buy a set of the JeepinByAl A-Arms with the H1 Hummer 3/4 ton GM replacable spicer ball joints. They are a little cheaper and will be easier to get replacement parts. Plus they are being made to help out camber issues with lifted XK's.Does that mean you're going to take one set off my hands?
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
