If I did not want to build my own I would get it and save the time but I am looking forward to the build.
If I did not want to build my own I would get it and save the time but I am looking forward to the build.
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Jon you can always have a his & hers version.
,
If you can put a little tiny roof rack and Foxwing awning on it, (like mine) I'll consider it.
What scale is it? I've been wanting a 1/10th scale R/C. I do like yours though, even if it isn't that big.
2006, 4.7L, QTII, Toyo Wild Country M/T 265/70R17 tires, Ultrasport 175 wheels, Rocky Road 2.25'' lift kit, HID off-road lighting, Surco 50x60 roof rack, Foxwing awning, Superchips performance programming.
Not sure on the actual scale since the body itself is from a Dickie R/C car. The drivetrain is a 1/18 Losi MRC, but the body on those are much smaller. If I had to guess i'd say 1/14 or 1/16.
I upgraded the rear driveshaft today. The stock MRC driveshafts can't handle the torque of the upgraded motor so I put the aluminium upgrades on. Figured I might as well get the crawler in tip-top shape
Not to mention the upgraded blue driveshafts look awesome !
And like I said, this thing comes with A BUNCH of upgraded/spare parts. Could probably build a 2nd crawler...
The Mamba Micro Pro ESC is also one of those "must have" upgrades over the stock crawler. It lets you tune a lot of the parameters such as acceleration curves, braking curves, etc to make the crawler handle exactly how you want it. I tweaked the parameters so the vehicle would slow down & stop nice and smooth without doing an endo! (http://www.castlecreations.com/produ...micro_pro.html)
Who is the lucky receipient?
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
2008 Jeep Commander 3.7L V6 4x4, Rocky Road 2.25" lift, Bilstein Struts, Monroe Sensa-Trac Load Leveler Shocks, Rusty's Adjustable Track Bar, K&N CAI 63, Flowmaster Super 44 Offroad Muffler, Bull bar w/ driving lights.
There are currently 1 users browsing this thread. (0 members and 1 guests)