Just ordered OME HD lift, what else?

[peteyturbo]

I asked the same question awhile ago, here's the thread with lots of part numbers and info
http://www.theultimatejeep.com/showt...else-is-needed

Thanks I knew I saw it somewhere but my search was not catching it!!

Love the color, are headlights painted on the inside?

Yes I took them apart and painted them, it was a horrible experience

I would recommend a Rusty's Rear Adjustable track bar. Its not needed but will get your rear axle aligned back to where it should be. Without it the rear axle pushes out to the driver's side due to the oem track bar mounts being on the driver's side frame and passenger side of the axle. Other then that if you feel the need you can replace the upper and lower coil isolators front and rear depending on how bad your current ones are. I just got the rear upper and lowers for my buddy from the dealer and if I recall the total cost was around $20 for all four.

I always wondered what the track bar was for. I will probably install that with the UCA's within the next month or so for the "final alignment". I plan on replacing all of the isolators for sure..