Hey guys. i did filter change about 3 weeks ago and 2 weeks ago it started shiffting really hard. do you think i messed something up? if the collector is touching bottom of pan, would this cause hard shifting? i used wix filters and castrol atf+4. im getting no codes.
Last edited by brand0n; 11-07-2012 at 02:12 PM.
Did you put a new filter seal on? And if yes, were you able to get the old filter seal out?
If you put the filter seal on without removing the other one, you need to pull it apart... The collector should not be touching the bottom of the pan so that leads me to believe you didn't remove the original seal.
Hey Matt, what do you mean by the filter seal? You TALKING about the O Ring?Originally Posted by Matt
It's not really an o-ring. It looks like this:
i don't really know if it's touching, just through research, heard it could be a common mistake some people make. thinking back ,cant really remember if there was one or not. if there was i would of removed it. if it is touching pan wouldn't i get a code or something?
ONCE AGAIN....THANK YOU
Getting that seal out is a PITA... and even popping the new one in is pretty difficult if it doesn't go in perfectly straight.
If you can't remember, that means you didn't take the old one out. So if you might have put the new one on, your problem is you're not pulling fluid into the trans properly.
$&%# !
I have rubber O ring that came with my filter. Nothing like what you are showing. May be that is just for the Hemi?It's not really an o-ring. It looks like this:
There are two filters in our trans (4.7L and 5.7L have the same trans)... are you thinking of the one that looks like an oil filter?
Every single trans I've worked on has the type of seal pictured above on the pickup filter.
Yeah that gold color seal was a PITA!!! Just getting the old one out was hard. Then I bent the new one putting it in and had to buy a whole new filter just to get another seal. You would know if you swapped out the old one for the new one.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote