Alright I'll try that tonight. Just to be sure, I need to pull the fuse out, drive with the fuse out to try to replicate the noise, and then put it back in? Sorry for being such a pain in the ass lately lol.
Sent from my RAZR MAXX using Tapatalk 2
Alright I'll try that tonight. Just to be sure, I need to pull the fuse out, drive with the fuse out to try to replicate the noise, and then put it back in? Sorry for being such a pain in the ass lately lol.
Sent from my RAZR MAXX using Tapatalk 2
Last edited by ItsMeKO3; 01-24-2013 at 10:08 AM.
2005 WK - MY GARAGE
I havent come across the 2005 not working thing before, but we get some different stuff down here. We dont actually get the 3.7 QT1 at all, so there may be things in the software of that i havent seen! When the grinding noise starts, does the jeep try to brake itself while you are still on the throttle?
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
I have read from numerous people that 2005 WKs cannot completely turn off traction control by holding down the button. I'm not sure about WHs, though.
John
2007 Grand Cherokee Limited | QDII | 3.0L Diesel | S4xC Shackles Mounts | Goodyear Duratracs
Bilstein HD Front/Rear | Rusty's 1/2" Strut Spacer | Hemi XK Front/Rear Coils | HID Projectors
Yea I've never had any luck with completely turning it off. The most I can do is "partially" disable it by pressing the button once.
But no. It doesn't seem to apply any brake when the noise starts. And once the wheel starts to straighten back out it goes away.
2005 WK - MY GARAGE
I didn't get a chance to pull the fuse. I was looking it up after work and I wasn't sure which one it was. I found 2 that had to do with ABS? Not sure if that's what I want. Before I could figure it out my fiancee told me about the meeting for our wedding that I forgot about. Then dinner at her parents. I'm still not sure which fuse I'm looking for lol.
Sent from my RAZR MAXX using Tapatalk 2
2005 WK - MY GARAGE
I'd pull the one under the hood for the ABS pump itself (that's normally the "grinding" sound you hear when it activates)... no power to the pump should equate to no noise.
I'll give that a shot tomorrow. Thanks.
2005 WK - MY GARAGE
It's the ABS Pump fuse you need to pull. It's a pink fuse located in the fuse box under the hood on the drivers side.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 1 users browsing this thread. (0 members and 1 guests)