John's 1" Lift

[lekmedm]

Your Right

His right what?

Sent from my SAMSUNG-SGH-I727 using Tapatalk

[pjmjr508]

that it was taller not thicker.

[lekmedm]

that it was taller not thicker.

I was just teasing, Phil. "You're (you are) right." not "Your right." like "...your right foot?"

I saw someting on FB where someone created a new word: "thiery're" to solve the conundrum over which to use: their, there, or they're.

[paroxysym]

Well finally wrapped my version of this up on my 4.7. Did the bilstein HDs on all 4 corners, JBA strut spacer up front and matts 1/2" spacer in the rear. Also I installed all new isolators as well. Right now it's sitting at 19.5" hub to fender/34" ground to fender in the front AND 22.5" hub to fender/36" ground to fender in the rear. I didn't expect that much in the rear to be honest. Hopefully it settles and the front stays where it's at. I did. Price that the rear is 1/2" different on each side(passenger side being higher) and that's after I swapped the springs from left to right- twice. Nothing made a difference.

[Matt]

How much gas is in the tank?

[paroxysym]

How much gas is in the tank?

Right now there's a 1/4 tank.. Yesterday when here was a a 1/2" there was a a 1/2 tank.

I can't believe the ass end is higher than it was with my BB.


Sent from my iPad using Tapatalk

[jjt250]

Wow that's high in the rear. You did XK Hemi coils all around, too? I actually took out my Matt's 1/2" spacer in the rear because I wanted a more leveled look but even with it in, it was never 22.5". I would take out that rear spacer and also see if it settles anymore.

[paroxysym]

Wow that's high in the rear. You did XK Hemi coils all around, too? I actually took out my Matt's 1/2" spacer in the rear because I wanted a more leveled look but even with it in, it was never 22.5". I would take out that rear spacer and also see if it settles anymore.

Yea looks like I'll ride around a week on it and take it out.

Are you running a rear swaybar john?

[jjt250]

Let us know the results- the back shouldn't be up that high. Yeah I'm running stock links and sway bars f/r

[paroxysym]

Let us know the results- the back shouldn't be up that high. Yeah I'm running stock links and sway bars f/r

Yea I'm stumped as to why the ass is so high. Did you install new isolators when you did yours? Hopefully it settles without the spacer to 21" at least.