John's 1" Lift

[jjt250]

Wow that's high in the rear. You did XK Hemi coils all around, too? I actually took out my Matt's 1/2" spacer in the rear because I wanted a more leveled look but even with it in, it was never 22.5". I would take out that rear spacer and also see if it settles anymore.

[paroxysym]

Wow that's high in the rear. You did XK Hemi coils all around, too? I actually took out my Matt's 1/2" spacer in the rear because I wanted a more leveled look but even with it in, it was never 22.5". I would take out that rear spacer and also see if it settles anymore.

Yea looks like I'll ride around a week on it and take it out.

Are you running a rear swaybar john?

[jjt250]

Let us know the results- the back shouldn't be up that high. Yeah I'm running stock links and sway bars f/r

[paroxysym]

Let us know the results- the back shouldn't be up that high. Yeah I'm running stock links and sway bars f/r

Yea I'm stumped as to why the ass is so high. Did you install new isolators when you did yours? Hopefully it settles without the spacer to 21" at least.

[jjt250]

No I didn't install new isolators with mine but I only had ~45,000 miles when I upgraded. They looked to be in good condition at the time.

[paroxysym]

Well drivers side has settled to 20.5" and the passenger sides sitting at 21.5". I'm thinking of taking both 1/2" spacers out- adding an additional isolator to the drivers side and that should bring it down to roughly 20.5" on the drivers side and 21" on the passenger.

Sorry for filling your thread with my BS john

[jjt250]

Maybe try swapping the springs on either side? Maybe they are side specific...I think that could be the solution to your problem.

No worries man, that's why the thread is here.