I put the rocky road 3/8" spacers on this weekend with the OME HD and there is still some thread left above the nut.... somewhere between an 1/8" and 1/4" I would think without going to measure.
I put the rocky road 3/8" spacers on this weekend with the OME HD and there is still some thread left above the nut.... somewhere between an 1/8" and 1/4" I would think without going to measure.
Thanks.
PJMJR508
(Happy Jeep)
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
I just measured mine for the hell of it, im just over 37" and am running a slightly taller tire than you guys.
Curious... for you guys measuring close to 38", whats your center-of-hub to fender measurement at ride height and then at full suspension droop (jack up from the crossmember).
I'm trying to remember when I measured this, but pretty sure I was under 2" of suspension droop with my current setup. If you guys are almost an inch taller....
I will be able to get all the measurements this weekend.
PJMJR508
(Happy Jeep)
If I recall correctly I sit somewhere around 38 inches but I have 285/70s
EDIT: I just looked in my garage thread and I was at 37 3/4 inches when the tires were new.
Last edited by 07JeepXK; 02-21-2013 at 07:44 PM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 1 users browsing this thread. (0 members and 1 guests)