Anyone know if the medium springs sit any lower? I look to be ordering soon and not wanting a reverse rake any more than the current rake.
Anyone know if the medium springs sit any lower? I look to be ordering soon and not wanting a reverse rake any more than the current rake.
2008 Jeep Commander Overland
I had MD rear springs installed for a few days. Didnt like them because they didnt provide enough lift so I swapped them out for the HD's and gained almost an inch in the rear. I had HD coils up front already and thought I'd be fine with the MD's in the rear cause I took out my third row seats. I was wrong
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
get a digital camera :P
I have a digital camara...... imbedded in the phone!
It's no Nikon D70 or even a Coolpix for that matter.
Do you have a case that covers the lens? If not, try cleaning the lens. Every picture I post is from my phone (Galaxy S and now the S3). They automatically load to dropbox the I upload them to photobucket when im on my computer.
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
I added Monroe Load Levelers in the back to bring it up an inch to 37 1/2. I had also planned on adding Matt's spacer, but there is a problem......... it barely squeaks through the garage now.....
What does that black triangular bubble that sticks up on the back center of the roof do? And can I remove it before the garage does? It might make a mess when it does it.
Also, I might be higher in the front due to not cranking the strut bolt all the way down on the spring until it bottomed out. What are the implications of this? maybe it is causing clunking in the front end when going over bumps and additional height (who wants that!)
Also what is the best way to tighten that nut once the struts are in place? I used tin shears to increase access through the fender tower but the shaft spins with the nut. If i grab it from below with vise grips it may mark up the shaft and create leaks in the seal, no??????
That black piece is the satellite radio antenna. How low is your garage opening? ? I barely fit in mine but I have a roof rack.
Your front end noise is definitely the strut nut being loose. You can install spring compressors to take some preload off the mount and use a coordless impact to turn the nut.
There are currently 1 users browsing this thread. (0 members and 1 guests)