Wanted to get this figured out before my shocks come. Ideally i'd like to mount the reservoirs in the wheel well above the tire, but it looks like the tire will hit when flexing. Maybe if my wheels were 4.5" backspace i'd be OK, but then I couldn't turn my front tires so its a bit of a catch 22.... the 5.7" backspace lets me fit bigger tires, but eats up clearance in the wheel wells for resi mounts.

SO, it looks like I may be able to mount the resi lower down, right on the spring perch. Took some pictures of the area and put an electrical tape roll that measures 2" in that location and stuffed the tire using a floor jack. I get about 1/4" clearance, but thats without the suspension dynamically compressing.







With the tire stuffed





^^ It's hard to see in those two pictures because I couldn't get a good shot from underneath, but the sidewall curves back in and there's more clearance than it looks. And if I move the tape upwards, it touches both the fender wall and the tire sidewall so I cant move it up much.