Just make sure when you reinstall the sway bar with the new bushings that the gap you mentioned is the same on both sides. Ie make sure the sway bar is centered properly before tightening the mounts
Just make sure when you reinstall the sway bar with the new bushings that the gap you mentioned is the same on both sides. Ie make sure the sway bar is centered properly before tightening the mounts
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Looking good
PJMJR508
(Happy Jeep)
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
So I finally paint my headlights and got my new Rola roof rack mounted!
And I'm working on replacing sway bar links and tie rod ends right now!
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Looking good man! I love the color
Whats the deal with the spacers you're trying to get?
Thanks man I love it too!
After I double lifted the front, it brought the knuckle and the wheels further inside the wheel well. So the tread on the tire in the back is a little outside the fender, the tread on the tire up front is a good 1/2" inside the fender. So I'm going to try what Adam suggested and run 1.5 in the front, and 1.25 in the back with some 18" jeep sahara wheels that a buddy is selling to me. And yes, I'm selling my 20x9's! Lol.
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Holy crap I didn't think it was possible for someone to change tires and wheels more than me..... high five bud!
There are currently 1 users browsing this thread. (0 members and 1 guests)