Are your sway bar mounts flat or do they have the ridge in the middle of them? If you're not sure, take a pic.
If they have the ridge, you need PN 52090155AH.
Are your sway bar mounts flat or do they have the ridge in the middle of them? If you're not sure, take a pic.
If they have the ridge, you need PN 52090155AH.
My 07 4.7 has the ridge in the middle
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I'm pretty sure they have the ridge... Lol
Is there supposed to be that gap to the left of the bushing?
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Those bushings look pretty worn... i'd replace them regardless.
Oh yeah I am. I placed an order earlier today at Rockauto for new sway bar links and bushing and new inner and outer tie rods!
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Just make sure when you reinstall the sway bar with the new bushings that the gap you mentioned is the same on both sides. Ie make sure the sway bar is centered properly before tightening the mounts
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Looking good
PJMJR508
(Happy Jeep)
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
There are currently 1 users browsing this thread. (0 members and 1 guests)