Need some help guys. Where can I get a 12 volt regular from? I was to ensure no more that 12 volts gets to the actuator when the front diff is engaged
Need some help guys. Where can I get a 12 volt regular from? I was to ensure no more that 12 volts gets to the actuator when the front diff is engaged
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I did a google search looks to be a bunch of different ones, radio shack has a cheap one..
2K6 Limited Jeep Green Metallic/Saddle Brown Leather XK HEMI QDII Old Man Emu HD Suspension w/ Fox Emulsion 2.0 Rear Shocks 1.5" SpiderTraxx Wheel Spacers 265/70 GoodYear MTRs w/Kevlar True Dual Exhuast w/IMCO 50 K&N 63 CAI Diablo 91/Performance Transmission Tuned SA Belly Skid MOPAR Gas Tank Skid, Transfer Case Skid, Suspension Skid Front Tow Hooks 6k HID Lows/3k Fogs
Hmmm I'm not to educated on the whole regulator but was told it would be a good idea to have one.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Whats the resistance across the solenoid?
Since you want to regulate 14v (charging voltage) down to 12v it may be easier to just put a resistor in the circuit to achieve a 2v drop.
Last edited by Matt; 03-13-2013 at 07:01 AM.
We were just talking about this at the shop. Not a clue what the resistance is across the solenoidOriginally Posted by Matt
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
You can measure it with an digital multimeter. When you get that measurement we can calculate the resistor size needed to provide a 2v drop and sufficient amperage.
Mark he wont get any codes because its a stand alone system that he'll be controlling with a switch, not tapping into the FCM
I guess I didn't express myself clearly. I didn't mean to imply Adam would get codes. I meant that I had a code that very well may have been related to the harness as much as the solenoid. The harness could fray or harden. This could end up being a gremlin for Adam's install. I realize he's wiring this independent from the XK's computer.
I'm not sure this was any clearer than before!
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
Yeah I guess I wasnt following why he would have an issue with the harness because I envisioned him running his own wires to the solenoid, not using the oem harness.
I'm using the oem harness that's inside the diff. Everything from the outside of diff will be wired according to what you say I need. Lol
I should run an inline fuse correct? What size 30 amp???
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote