i just installed the RC spacer lift on my 06. i also had 2. 1/4" spacers made. i have got it all installed and everything is rideing just fine but. i put the 1/4 spacers on top of the RC spacer. Tymac just told me it should have been under the RC spacer. whats the differance?
It's fine above. As long as there were enough threads on the studs for the strut nuts under the hood. The spacers are designed to go on top
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Edit. I type too slow
Lol did I beat you??Originally Posted by Matt
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
yeah i had plenty of threads
Your good to go then. Did you get an alignment after install?
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Post up some pics! I'm interested to see how tall your front ride height is.
Last edited by Ross; 04-22-2013 at 07:18 PM.
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
thanks for the info guys. im going on thursday for new tires and an alignment. ill post some picks tonight, i dont have any before shots that are any good though.
it definatly drive differant but that might have to do with the alignment. seems to track straight though
here she sits. i also replaced the struts and shocks since i was there. i put the Monroe coil over shock in the rear
it sits a bit high in the front but i think that will at lease even out once i put the skids on
Sweet. Now some wheels/tires/skids/sliders.... then trails
Is your driveway level? Looks like its sloped, that'll change the measurements a bit.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
