Heck yeah! Do you have a link? This would be the way to go for anybody that wants have a modified SL!
Sent from my DROID RAZR using Tapatalk 2
Heck yeah! Do you have a link? This would be the way to go for anybody that wants have a modified SL!
Sent from my DROID RAZR using Tapatalk 2
Just type the part number (24-225793) into google. Jon should get these in his SA store too!
These shocks are great for a replacement to spacer lifts where people also swap out struts... just get the 5100 adjustable and be done with it.
Are these supposed to go with OME springs in place of the SL spacer?
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
If you're looking to add height to the superlift, I would not use these with OME springs Or the spacers.
They achieve lift by adding pre-load to the spring (like the SL spacer does). So i'd ditch the spacer, use stock springs, and set them at the 1.5" lift setting for a 5" superlift, or 2" lift setting for a 5.5" superlift.
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
lol sounds like a plan.
Hell, bring over a set of those shocks and we'll throw them on
OK I'm rethinking my "no cutting coils" stance.
Crunched some numbers and here's what I think would be a great addition to the superlift spacer:
5100's with OME MD springs with 1 complete coil cut.
The issue with stock springs is the spring rate is lacking for added accessories... so some stiffer springs are desirable. The OME HD springs have a rate of 630 lbf/in. If I take an OME MD spring and cut one complete coil off, the resultant spring rate will be 600 lbf/in which is nice because it adds load capacity over the stock springs but still won't be as stiff as the HD's.
Ideally i'd hope that the OME MD springs, with one coil cut, and 5100s set to .75" would put the superlift right around 5"....then you could get 5.5 or 6" by adding preload via the 5100s.
If its too tall, more could be cut off the spring... i'd say bring it up no further than the OME HD rate of 630 lbf/in.
There are currently 1 users browsing this thread. (0 members and 1 guests)