So I've replaced my bushings with new blue ones that are ribbed correctly for her pleasure.... I replaced them ~6 months ago and am having knocking sounds again. I removed the sway bar and links fully and the sound is gone so I know its in the assembly. I checked motion on the links and they all are tight so i go back to the bushings.

Using my digital calipers I measure the diameter at 1.32-1.33. So slightly under the 1.34 that I expected. So where I go from here? Try the 1.29 ones and squeeze them or try to sleeve the bar? What if I slightly open the slit on the side and try to squeez the 1.34 by shimming?

What sayeth the flock?

06 XK almost limited....