With mine I had no problem... But like I said, he doesn't take very good care of his jeep. He has mud caked over everything that he never cleaned off.
With mine I had no problem... But like I said, he doesn't take very good care of his jeep. He has mud caked over everything that he never cleaned off.
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
I was not installing an RC lift, just new coils. From my perspective though, if you do it Matt's way, I think it would work. The RC spacer is only about an inch thick in the front, right? With the UCA off and the spring compressed, I bet you could swing it in.Originally Posted by oleblue27
John
2007 Grand Cherokee Limited | QDII | 3.0L Diesel | S4xC Shackles Mounts | Goodyear Duratracs
Bilstein HD Front/Rear | Rusty's 1/2" Strut Spacer | Hemi XK Front/Rear Coils | HID Projectors
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote