^^ yeah we know all of that.
Point is, the Superlift doesn't come with the proper links to correct the pinion angle.
Alignment shops can only adjust what is adjustable. If there's no adjustment, you're SOL until you get some better parts.
^^ yeah we know all of that.
Point is, the Superlift doesn't come with the proper links to correct the pinion angle.
Alignment shops can only adjust what is adjustable. If there's no adjustment, you're SOL until you get some better parts.
Well at least everyone knows what to look for now and if the pinion angle is bad its an easy fix! Just pull out your wallet though
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Last edited by 1USMC; 10-16-2013 at 10:10 AM.
2010 Limited > 5.7 > Pearl Black > QDII > 4"¯ Superlift w-SSR > Bilstein HD Struts + 1/4" spacer > RCV cv Axles > JBA 6" Springs + Matt's 1/2" Spacer > BDS adj LCA > 285-65-18 Nitto Trail Grappler MT's > Moto Metal 951 > K&N CAI > Flowmaster 50 > 4xGuard-Front/Belly skids + Grill Hoop w/ Front Receiver + Rear Diff. Guard > PIIA 520 ATP > Front Camera > Steel Armadillo's Rear Bumper/Tire/ Blitz Carrier/Super Sliders +Secure Console > Dual Batteries > OBA > JKS Rear-JBA Front Discos > FlashPaq
That pinion angle isn't all that bad but could use a slight adjustment with adjustable control arms.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Would a double cardon driveshaft not work here as well?
I am thinking of having one done for the front anyway.
Even with a DC rear shaft (i have one in mine, needed for anything over 4" IMO) you still need to align the pinion with the shaft. Each vehicle is proving to be slightly different with some getting a good angle and some worse with the supplied arms.
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
There are currently 2 users browsing this thread. (0 members and 2 guests)