And the final product looks like???
And the final product looks like???
2007 Jeep Commander 3.7L V6
2.25" RockyRoad Lift
18" Rockstars (Black)
WeatherTech Digital Fit
Sylvania Ultras (Hi and Lo)
20% Tint All Around
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Front receiver helping move an 8.5x20 enclosed trailer (loaded, about 6500lbs total) into the barn for the winter. The door opening is only 9 feet wide; I had 3" on each side to move through!
Looking Good
PJMJR508
(Happy Jeep)
so did you not make a bumper?
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
I have only the structural piece including the shackle tabs and the receiver at this point. The rest is rough sketches still. I need to turn them into real prints to give to a metal fab shop to cut and bend. My Solidworks guy (coworker) has been as busy as I for the last year and a half, therefore no forward progress...
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
There are currently 1 users browsing this thread. (0 members and 1 guests)