Front receiver helping move an 8.5x20 enclosed trailer (loaded, about 6500lbs total) into the barn for the winter. The door opening is only 9 feet wide; I had 3" on each side to move through!
Looking Good
PJMJR508
(Happy Jeep)
so did you not make a bumper?
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
I have only the structural piece including the shackle tabs and the receiver at this point. The rest is rough sketches still. I need to turn them into real prints to give to a metal fab shop to cut and bend. My Solidworks guy (coworker) has been as busy as I for the last year and a half, therefore no forward progress...
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
There are currently 1 users browsing this thread. (0 members and 1 guests)