The side with the tape adheres to the isolator. The opposite side (no tape) has a chamfer on the inner diameter to cup around the radius of the perch/body mount. If you have the tape on the perch/body its upside down and wont sit flush.
The side with the tape adheres to the isolator. The opposite side (no tape) has a chamfer on the inner diameter to cup around the radius of the perch/body mount. If you have the tape on the perch/body its upside down and wont sit flush.
Last edited by Matt; 02-18-2014 at 11:40 AM.
What Matt said about the tape. When I said they were installed correctly I was referring to the rubber isolators being in between the springs and matts spacers
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Thank you both, I will have to look to confirm.
raining alot here & it will not fit in the garage & moving in less than 2 weeks.
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)