Hmm, fail at deleting rear heat. One of the parts must be wrong or there must be different mounts on the engine With or without rear heat. The hose doesnt fit
Anybody done a heat delete with the hemi ??
Hmm, fail at deleting rear heat. One of the parts must be wrong or there must be different mounts on the engine With or without rear heat. The hose doesnt fit
Anybody done a heat delete with the hemi ??
I have the 4.7 liter and just ordered both heat and ac lines for a 4.7 liter XK without rear heat and ac. Ripped out all the old lines and installed the new ones
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I'm a bit puzzled by the heater hoses. The short one has one regular hole and one enlarged hole. The other hose has two regular holes. Could this be right ? Im a bit reluctant to cut out the old hose and risk not getting the new one in. I'm considdering just cutting of the hoses that goes down to the wheel weel and put in a "blind" plug in them . It should do the same as changing the hoses.
Post some pictures of the hoses you have.
Dont put a blind plug, you'll run the risk of it blowing off when the cooling system pressurizes
I have included 4 pictures. The pictures of the short hose is the 979 part. As you can see the hose is the same thinkness, but the hole in one end is enlarged. The longer hose with number 978 is the same in both ends.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote