Matt, i read this in your pinch weld faq. What do you mean with plastic hvac line guide ?
2) Cut away as much from the plastic HVAC line guide as possible. It sticks out further than it needs to and you'll gain almost 1/2" more clearance.
Matt, i read this in your pinch weld faq. What do you mean with plastic hvac line guide ?
2) Cut away as much from the plastic HVAC line guide as possible. It sticks out further than it needs to and you'll gain almost 1/2" more clearance.
Trim the part circled in red. It'll allow you to pull the fender liner back further for more clearance.
I looked at my engine (07 hemi) and those hoses look like they'll work. Did you pull off your engine cover and look where the existing hoses go? They come out of the firewall and go in the rear/top of the engine.
You also shouldn't have to cut any hoses. Just move the clamps and twist/pull to get the existing hoses off without damaging them.
I might try. It just looks like the bends are not logical and a bit strange with the hole noe beeing equal.
Hmmmm.... is the OPs right hand drive????
No, left handed. I will give it a new try on monday. Seems strange that there is a difference in the heating / cooling, but who know ??
I wonder if there are minor differences in the XH.
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote