I had a similar problem with my rear sway bar and removed it completely. I was running the OME HD and noticed very little difference though. Try adding some tape around the bolt head and threads like Matt is headed to suggesting
I had a similar problem with my rear sway bar and removed it completely. I was running the OME HD and noticed very little difference though. Try adding some tape around the bolt head and threads like Matt is headed to suggesting
2K6 Limited Jeep Green Metallic/Saddle Brown Leather XK HEMI QDII Old Man Emu HD Suspension w/ Fox Emulsion 2.0 Rear Shocks 1.5" SpiderTraxx Wheel Spacers 265/70 GoodYear MTRs w/Kevlar True Dual Exhuast w/IMCO 50 K&N 63 CAI Diablo 91/Performance Transmission Tuned SA Belly Skid MOPAR Gas Tank Skid, Transfer Case Skid, Suspension Skid Front Tow Hooks 6k HID Lows/3k Fogs
had the gf rock it back and forth or try to at least while i was underneath....
the driverside energy bushing has some play in it- i can move the swaybar up and down prob less than an 1/8", but still enough play to make some noise. the passenger side link where it connects to the swaybar is actually knocking around, so i suppose i need to retorque that as well. waiting to hear back from kolak on some new bushings, im hoping SRT8 bushings work on the addco so i dont have to grease them and the rubber bushings are supposedly quieter. that should eliminate any noise after all that... god willing. cause in about 3 weeks any jeep projects are going on the back burner when the kid gets here
Last edited by paroxysym; 05-21-2014 at 08:28 AM.
2007.5 WK Laredo
- OEM+ -
There are currently 1 users browsing this thread. (0 members and 1 guests)