Matt, you going to throw some marking grease on their to see if it's rubbing the hood? I started one because I didn't feel like stick welding. I was trying to go off memory because my XK is still at the dealer and wasn't smart enough to pull up some pics LOL. I used some pretty thick metal not sure it will clear the gaps.
Mine definitely clears the hood, i purposely have it touching the fender and used some fiber reinforced silicone rubber for the interface.
Although thicker than the steel i'd use if I was making this, Aluminum is nowhere near as stiff. So one thing I decided to add was another self tapper and "clamp" down on the mount which then makes it a nice firm interface at the fender. Also added some silicone just for good measure
Done!
Very nice! That was my original vision. The piece I have is a thicker stainless steel that I couldn't bend without a press, and fire from propane probably wouldn't do the job.
Now get into mass production!!!
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
That looks good man! I'm using steel so their is no give to it so if it clears it shouldn't rub. I see their are more bends I need to make now. I made the first bend in the press brake but couldn't fit back in to make the second bend so I had to heat it up. When I get my Jeep back I'll try finish it up.
What happened to your drivers side door?
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Been like that for a while nowOriginally Posted by 07JeepXK
http://www.theultimatejeep.com/showt...fer-SA-sliders
I forgot the first one at home so I made another one LOL I just used Matt's pictures to do it so I don't know if it will fit or not. I was bored and still don't feel like stick welding so I just goofed around with this in class today. I managed to twist itMy instructor said he meant to tell me it was slightly crooked but got distracted. So a 5lb hammer and a anvil straightened it out a little bit.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
