Getting Set to get the MOD 6" SL installed

[lekmedm]

I have some questions for the members that have installed the SL with the AEV ESP recalibration unit and also have the Flashpaq programmer.
Do you set the tire size on both units?
Do you need to set the flashpaq back to stock before adding the AEV ESP Unit?

Set it back to stock, install AEV, use Flashpaq exclusively for programming.

[Matt]

I have a feeling seeing PJ's lift is going to put me over the edge.... i'm thinking SL order after Christmas....

[lekmedm]

I have a feeling seeing PJ's lift is going to put me over the edge.... i'm thinking SL order after Christmas....

AWESOME!!! I hope you have a heater for the shop!

[Matt]

I do... lol but it won't matter since I won't have a free weekend until late March

[luckyse7ens]

I do... lol but it won't matter since I won't have a free weekend until late March

I can relate to that!

[pjmjr508]

I am very happy with this beast now.
Hub to Fender for the front as of lastnight with some miles on it.
FP 26"
FD 25"
I have 3 issues that came up after the lift.
Sounds like the new RCV axles are binding- will put the OEM's back on to see if that corrects that.
The alignment shop could not get the caster within limits
Have warning lights on now- I did not reset back to stock before adding the AEV unit- This week I will remove the AEV unit & then put back to stock & then install it again to see if that fixes that issue.

The guy that installed this lift stated that it is a lot bigger than he thought it was going to be. He said he really likes how it turned out, So am I. I will say this tho, getting in & out of this thing now is giving me one hell of a work out, I am short and I have to pull myself up by the Oh **** handle just to get in.

thx guys for you help

[Matt]

Sadly you wouldn't be the first with rcv issues.... at least they're good with warranty but too many guys seem to have this issue

Caster is tough to keep in spec on these vehicles. But as long as its positive and the vehicle tracks straight its nothing to worry about.

See if you can pull any codes with the superchips. All wheel speed sensors plugged back in (all the way in)?

You think getting in is an issue.... wait till you try getting that spare down! Lol

[lekmedm]

I will say this tho, getting in & out of this thing now is giving me one hell of a work out, I am short and I have to pull myself up by the Oh **** handle just to get in.

thx guys for you help

That's one of the reasons I ordered a Steel Armadillo slider set. They will give everyone a step up!

[06JeepXKHEMI]

Any pics?!?!!!