Getting Set to get the MOD 6" SL installed

[pjmjr508]

Quick question
OME HD Front Springs I need to have 1 coil cut off. Does it matter if the cut coil is the top or the bottom coil? I thought it would be the top coil, but want to make sure. It's at the shop now & they are asking which way I want done. They will be starting in the morning.


Dave answered this ? via FB
"Bottom. The top one is flattened off to suit the mount, the lower isn't and has a bevel to suit, so cut the lower."

Thx again dave

[pjmjr508]

some pics from get the new tires mounted & from the shop doing my lift

[pjmjr508]

[pjmjr508]

[pjmjr508]

hope to pick up tomorrow night after work.

[pjmjr508]

I have some questions for the members that have installed the SL with the AEV ESP recalibration unit and also have the Flashpaq programmer.
Do you set the tire size on both units?
Do you need to set the flashpaq back to stock before adding the AEV ESP Unit?

[Matt]

PJ, I'd put it back to stock, install the EGR and then program the tire size with the superchips. Might not have to put it back to stock but it's easy enough.

http://www.theultimatejeep.com/showt...ll=1#post37394

[lekmedm]

I have some questions for the members that have installed the SL with the AEV ESP recalibration unit and also have the Flashpaq programmer.
Do you set the tire size on both units?
Do you need to set the flashpaq back to stock before adding the AEV ESP Unit?

Set it back to stock, install AEV, use Flashpaq exclusively for programming.

[Matt]

I have a feeling seeing PJ's lift is going to put me over the edge.... i'm thinking SL order after Christmas....