Just put mine on yesterday. I didnt have a 24mm socket so I just muscled the lower strut bolt off with a crescent wrench. The drivers side seemed to give me more trouble than the passenger on both ends. Driver front took me about 90 minutes. Right side took maybe 15. In the rear, I had a hard time getting the coil to clear going back in because of the upper control arm hitting the gas tank skid plate. I ended up really cinching the coil with compressors and took the bump stop loose, put it inside the coil and pressed it in place once the coil was in. Again, about 45 minutes on driver's side and 10 minutes on the right.