XK-Forum.com Window Decal

[LWM]

How do you apply these decals? I assume they go on the outside of the glass but are they true decals which you apply wet, or are they stickers that you apply dry?

After cleaning the glass you remove the backing off the decal and apply it to the dry window and push out the air, you then pull off the front sheet.

[Matt]

I always apply them wet.. i use a water/soap solution (very very very little soap) so that I can move the decal around a little to make sure its positioned perfectly. Then you squidgy out the water and air bubbles and let it sit for an hour or so to dry (or use a hair dryer).

[TrialByFire]

Ok. Now I'm really confused.

[Matt]

They're stickers that you can apply dry, but then there's no room for error. So i use the water/soap solution to get the position perfect.

[Holaday07 4.7]

I rub an ice cube on them, it helps seperate the backing, and there was a little room for error.

[NeilSmith]

i just stick em and forget em. they are small enough that you can position them easily and small enough that you wont get air bubbles. i would use a water / soap solution on a large decal but didnt seed the necessity on these but you can if you like, its really no big deal.

[LWM]

i would use a water / soap solution on a large decal

I have one large one to install, I will use this method as well.