06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
Thanks everyone for your input ! I ended up finding a fuse in the interior fusebox thats off with the ignition. I used a "add a fuse" from autozone and tapped into it. Worked great !
The lights were working great until the light in the switch stopped working,so I figured I would take it apart see if I could change out the bulb,then the whole switch fell apart !!
Back to autozone for a new one tomorrow !!
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
In my KJ I had the green wire going to something switched ignition on. Radio, I think. Just get one of those add-a-fuse things from AutoZone and you don't have to splice.
This is with all of my lights on, including MOPAR Lightbar.
Same picture with a much faster shutter speed.
There are currently 1 users browsing this thread. (0 members and 1 guests)