How would you even mount a solid axle ? I guess there would be a LOT of fabrication to be done.
How would you even mount a solid axle ? I guess there would be a LOT of fabrication to be done.
'07 Commander 3.7 V6
2" Rough Country Lift with Vision Warriors and Goodyear Duratracs 245/75R17
BajaRack Mega-Mule with KC Daylighters
http://s624.photobucket.com/albums/t...cpZZ1QQtppZZ20
I really have no idea to be honest with you. I know very little about suspension and axles. I would just have to trust this dude I guess if thats the route I end up going in.Originally Posted by NeilSmith
Hey Sal, have you chatted with txbajacommander from the 'other' forum (he might be on this forum too, not sure)? I think he has a 6" lift and claims no problems. Might give you some insight.
2012 Jeep JKU Rubicon - 4-1/2" AEV lift w 35" Toyo's
03 BMW Z4 2.5i ESS Stage 2 Supercharged, Custom Suspension, Stebro Exhaust, Hamann Side Skirts
85 BMW 535is Lowering springs, bilstein sport shocks, extra attitude
The problem is his XK is only 2 wheel drive. So 6" on the rear is no big deal and on the front with out having to consider CV axle angles and stuff like that is why he can get away with it and have no issues.
ahhhhh gotcha. that does make a huge difference.
2012 Jeep JKU Rubicon - 4-1/2" AEV lift w 35" Toyo's
03 BMW Z4 2.5i ESS Stage 2 Supercharged, Custom Suspension, Stebro Exhaust, Hamann Side Skirts
85 BMW 535is Lowering springs, bilstein sport shocks, extra attitude
Are you talking about getting a 4" Super Lift and adding the 2" spacers or a real 6" lift? If you are doing the pre mentioned, then I believe it has been said that your cv's would be at the same angle as like just running the spacer lift.....????......IDK, just saying what I've read (somewhere, I don't remember..LOL).
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
One issue that I see with that approach is the new SL xmember is already cut out for the front axle and it is very close when done right so as not to interfere. If you further increase the angle, you may have to cut more of the xmember and that may weaken it substantially.
2012 Jeep JKU Rubicon - 4-1/2" AEV lift w 35" Toyo's
03 BMW Z4 2.5i ESS Stage 2 Supercharged, Custom Suspension, Stebro Exhaust, Hamann Side Skirts
85 BMW 535is Lowering springs, bilstein sport shocks, extra attitude
I would prefer a true 6" lift. But if adding the superlift dosent change the angle of the CV axle that might not be to bad I guess.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
