Secure Console / Lockable Center Console

[robpp]

great. thanks. i got ot installed in my wk grand cherokee. exact fit.

fwiw: i wasnt into epoxy right now but it needed someting on that side ......so I used some .030 2-sided tape instead.

[LWM]

fwiw: i wasnt into epoxy right now but it needed someting on that side ......so I used some .030 2-sided tape instead.

That is a good idea too, all you need is something to make the bad guys think it is not worth hanging around inside your vehicle. Most auto burglars are in and out fast so the Secure Console in itself is enough of a deterrent.

[strokeZ]

Just installed it yesterday...perfect fit and a nice addition to the Jeep! Thanks for taking the time to develop this!

[1USMC]

Making very slow progress with my Commander projects; but I am happy to report I also just installed my " Secure Console ". Very nice !! Fits perfect, quick and easy to use.. I like it. *** <<<.>>>

[LWM]

How to set the combination:

1) The combination is factory set at >>0-0-0<<
2) Combination must be on opening number prior to resetting.
3) On the underside outer edge of the lock there is a hole for
the code reset button. Rotate the face of cam until the code
reset button comes into view.
4) Push this pin in with a paper clip and keep it pushed in.
5) Set your personal combination by turning the dials to the
desired combination.
6) Release the reset button and your new combination is set.
7) To lock, rotate lock to “Locked” position. Rotate one or more
dials after lock is closed. To open the lock, turn dials to
your personal combination.
NOTE: If you desire, The Easy Access Combination Lock can
be installed such that it is non resettable by the end user.
*Take off the screw to the cam and remove the cam and the
stop cam.
Rotate the cylinder 180 degrees and then put the Stop Cam
and the cam back on.

[strokeZ]

Everytime I open the compartment I get the same comment - WOW this thing has a safe in it?!?!?!? Great product, great fit, great performance.