PJMJR508's Garage

[stites-xk]

Helps out alot!
With that setup were you able to fit 315's?

I don't run 315's. I run 305's right now. I like it the way it is I might go to 315's at a later date.

Sent from my SGH-M919 using Tapatalk

[pjmjr508]

I don't run 315's. I run 305's right now. I like it the way it is I might go to 315's at a later date.

Sent from my SGH-M919 using Tapatalk

Thx,
To fit the 315's the way you have it now would it take cutting to make fit?

[pjmjr508]

Well I had a DOH moment.
What I thought were prices for each were in fact per a set. So I found what I have been looking for & want to thank you to all for input towards what I am trying to get done and the right way.

[lekmedm]

Here's a tip... Grease that "ball joint" end of the SL rear swaybar end links. Mine were squeaking something awful after the last winter.

[pjmjr508]

Here's a tip... Grease that "ball joint" end of the SL rear swaybar end links. Mine were squeaking something awful after the last winter.

Will do, thx for the heads up.

[pjmjr508]

Got the Springs in & the RCVs should be here next week. Now just need the remaining 2 missing parts from SL. Should be installed first weekend of OCT.
Painted the new diff cover also.

For scale I used my spare & has no miles on it.

[pjmjr508]

While updating a post I ended up needing to redo that post from 9/3/14.

Tires came in today and here is some of the other items I have in so far.
Still waiting on the RCV Axles, JBA 6" Rear Springs and the 5100's. Also the missing parts of the SL.
I'm not waiting on the 5100's to install everything else. Will just swap in once I get them.
tire info:
https://www.treadwright.com/individu...315-70R17.00-D