PJMJR508's Garage

[stites-xk]

What I did was use the OME HD springs with one full coil cut off. I used everything from super lift up front except for the pre load spacer. If that helps.

Sent from my SGH-M919 using Tapatalk

[pjmjr508]

What I did was use the OME HD springs with one full coil cut off. I used everything from super lift up front except for the pre load spacer. If that helps.

Sent from my SGH-M919 using Tapatalk

Helps out alot!
With that setup were you able to fit 315's?

[pjmjr508]

07 No preload spacer works great for me.
Matt thank you for the info.
The brake lines & sensor's mount I will have checked & Modified if needed when installed.
The brake lines will be replaced with in 6 months with the new steel braided ones from crawl offroad for lifted XK/WK's. They are $255 for the full set.
Already did the gas tank skid MOD and already did extend the bumpstop (will check again once lift & tires are put on) to ensure tire clearance.

I have been looking for 31" shocks for the rear that I can afford other than the fox ones you have, what other ones would you recommend?

[Matt]

I'm on the road now but can look up some part numbers tonight if we're not home too late. What price range are you looking for? Can get Fox 2.0s (non resi) for ~300 (can always have them rebuilt with the adjustable resi's in the future) or any level of bilstein you want... 5100, 7100 etc.