Welcome, there is a discussion about transfer case swaps somewhere around here or in a different site.....I'll try to find it for you.
Welcome, there is a discussion about transfer case swaps somewhere around here or in a different site.....I'll try to find it for you.
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Welcome aboard can't wait to see your pics.
Welcome to the XK Cult! There's guys with lots of great ideas on here..
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
Hey man welcome aboard!
FYI the fuel tank skid is only $180 here: http://jparts.com/product_info.php?c...g1ve60snt391h0
Not hard to install... Sal and I both have threads in the "how to" section. They're worth checking out... some basic tools and you're good to go
Nice XK welcome to the forum.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Thanks for this idea! I recently purchased my front suspension and transfer case OEM plates. The front one had to be postponed since there is a headless bolt I need to get out (BTW, when I was trimming the bumper, I tried it and lost the extracting bit :S ) Then I was about to instal the transfer case plate, but it needs the gas tank plate in order to "hang it" from the tab with 2 holes... I didn't buy the plate for that because of budget an installation labor...
Red, QT1, 3.7ltr, 2" Daystar lift, 1.5' Spidertrax wheel spacers, 265/70/R17 retreads, rear grab handles, front susp. skid plate, front bumper trimmed (thx to Sal's idea)
Old pics and vids (before trimming): http://www.flickr.com/photos/israselene/
There are currently 1 users browsing this thread. (0 members and 1 guests)