I too am looking at the SuperLift, Let me know if you find a great deal.
I too am looking at the SuperLift, Let me know if you find a great deal.
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
The best i could find was on jackit.com and that is around $1900. also could i run a -12, +18, +30MM? any of those?
2007 Jeep Commander Overland///5.7L V-8 hemi////Quadra-drive II////Cobra Cb with PA system////K&N cold air intake////Superchip Flashpaq////Navigation system////Boston acoustics Future mods: 4" superlift///All terrain tires///HD UCAs///HD LCAs///OME front coils///Rancho rear coils///Defender roof rack///light cage///Steel bumpers///Rear differential guard///Rocky Road supersliders///tail li
Depends on the wheel width... but +18 is probably your best bet if you're in the 8-9" wide range?
yeah they are 9". what about 33x12.50x18
2007 Jeep Commander Overland///5.7L V-8 hemi////Quadra-drive II////Cobra Cb with PA system////K&N cold air intake////Superchip Flashpaq////Navigation system////Boston acoustics Future mods: 4" superlift///All terrain tires///HD UCAs///HD LCAs///OME front coils///Rancho rear coils///Defender roof rack///light cage///Steel bumpers///Rear differential guard///Rocky Road supersliders///tail li
..... stick with a 285/65/18
2008 Overland in Black
Loaded, Leather, 5.7 Hemi QDII,
All 3 MOPAR Skids, VEC, Tow Pkg., 2" Rough Country Lift, 1 1/4" Spidertrax spacers, 255/75/17 BFG M/T's, Flowmaster 50 series muffler
285 = width (basically the tire width) in millimeters. 285 millimeters wide.
65 = sidewall height as a percentage of the width. So 65% in this case. 65% of 285mm = 185mm.
18 = wheel diameter.
You can figure out the overall tire diameter by just adding the wheel diameter and 2 times the sidewall (So 18" + 185x2mm = 32.56").
A QUICK way to determine tire diameter is this:
(First Number) x (Second Number) / 1270 + (Third Number)
So: 285 x 65 / 1270 + 18 = 32.58"
To determine tire width, just convert mm to inches by dividing by 25.4:
285/25.4 = 11.22
QED:
285/65/18 = 32.5x11.2x18
There are currently 1 users browsing this thread. (0 members and 1 guests)