Installed Monroe Load Leveling Shocks on Rear

[Matt]

Yeah i'm running the OME HD and F150 load leveler combo. If you're going to run this combo, primarily on a CRD WK, make sure you also install a set of 1/4" strut spacers up front or you'll end up with a lot of rake. If you're not planning on going offroad at all, a set of load leveling air bags may be a better option if you dont want to run the extra spacer up front.

[Pixelcodex]

I was concerned mainly because of the difference in weight between the XK and the WK. I know that OME springs are the same, but thought maybe the XK weight would make them sag more. I will have to look into those spacers: is 1/4" enough to make it level or keep the stock rake? Thanks

[cprokopf]

My WK has the 2" lift with about 107,000 miles. The front and rear shocks are stock. It appears the rear is sagging. I am planning on installing the F-150 load levelers this weekend (or next Tuesday). I'll take some before and after pics for the forum.

[Matt]

I was concerned mainly because of the difference in weight between the XK and the WK. I know that OME springs are the same, but thought maybe the XK weight would make them sag more. I will have to look into those spacers: is 1/4" enough to make it level or keep the stock rake? Thanks

You'll probably have a little less than stock rake with the 1/4" spacer. It certainly won't be level.

[cprokopf]

Looks like ordered two sets on accident. Anyone interested in buying a set at a discount? Still in the box and unopened. If not, I'll just return them.