Just finished up my skid install. I ended up breaking all the retaining clips and the ones I found for replacements aren't quite the same but they worked and hold the lines. I broke the large EVAP clip at the back of the fuel tank with the 2 lines that branch off and have no replacement clip (wasn't supposed to come off, but it did........oops). The only other thing I ran into was the Hemi has no bleeder valve on the fuel rail so I removed the fuse for the fuel pump and ran it dry to remove the pressure. I also used a high lift floor jack to support the tank when I dropped and reinstalled the tank. Sal, the write up helped a great deal, thanks.