Sal-XK's Garage

[NeilSmith]

I have lights on the back also. They come in handy sometimes, especially when backing into the driveway with 2 feet of snow on everything. Speaking of getting in garage, I forgot my rack had lights and went to a carwash ( had been in there with just the rack ). I heard this loud clunk and couldnt figure what it was until my light covers went flying across the freakin hood. LOL !! I drove out real quick so not to damage anything else and had to go down the street to another carwash where I could rinse the soap off. What a dumb@ss !!

[Sal-XK]

Dude thats funny stuff. The only thing I hit with the lights besides on trails were my kids basketball hoop.

Interesting though since I moved the lights to the back and down plus I removed the ax and flag was in real bad shape I have gained .5 MPG extra. I was surprised when i saw my average climbing I did not change driving habits or routes either. I also turned my fishing pole mounts parallel with the ground while not in use. I have also noticed a lot less wind noise form inside the cab and the biggest benifet is I CAN NOW FIT IN MY GARAGE So all in all I'm glad I moved them back.

[IamJEEP]

Very nice, I like your style. Keep it up.

[Sal-XK]

Well I started out by changing the front diff rear diff and transfer case fluid and got that all done. Then I decided to try and add the lights Don sent me. So I pulled my CB and the switch for the rear lights and started over. I reinstalled the CB correctly and put two new switches in. I tired to put them in the spot where I had blanks in but there was a circut board back there so oh well. Anyway here are the pics.

[Sal-XK]

Saw Don, post his list so I took a screen shot of my list as well.

[Sal-XK]

I it was a pleasant 70 degrees today so I went home early so I could get this mod started. Here are some pics so you can see whats behind there




Ok so got the panel off like most the stuff on the XK it pops off with a little force. Next I decided to use the actual outlet from the inverter it self instead of putting another one in and connecting them some how. So I had to take the inverter apart to accomplish this.


Then I figured out the wires were not long enough to reach the panel and mount the outlet so I needed to extend them and of course I'm out of wire so to the store I go.
Extended Wiring, The blue wire you see is the wire I added. Not the best solder job but it will hold anyway.



Next I traced out the outlet on the panel and used my dremel to cut the shape out.


I screwed the outlet into the panel and mounted the inverter with velcro to the panel. This stuff is strong its actually ridiculous to try and pull apart.


Now the finished product



I ran the wires up the side of the center counsel tucking all the wires inside the counsel. I left the wires inside my dash for now it got late so I'll tie them in on the next nice day we have. It will have full time power regardless if the jeep is on or not.

[LWM]

Very nice, thanks for sharing the project with us.

[jay in nb]

Nice rig Sal, what size is your roof basket, i saw 3 different size by Rage on the web site, also in one of the pics on the passenger side you have a awning or is it a tarp? Summer, fishing and camping is around the corner and i need more space to haul and shade for a cold drink.

[Sal-XK]

I have a running review and write up of my basket CLICK HERE If what you need is not in there let me know and I'll help you out.

[cico7]

My hooks are turned down and I havent had any trouble with them.