Does your tank skid have the threaded holes to mount the tcase skid? If not, its very thin sheet metal and won't work well as a skid plate .
Does your tank skid have the threaded holes to mount the tcase skid? If not, its very thin sheet metal and won't work well as a skid plate .
Check out whats going on this weekend!!! 2nd shot is just to give an idea of the size of the lights... they're 9" OD.
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
Yeah I definitely realized that when i looked at the Matrix in person. I decided that i'm just going to make a light bar out of one of my left over Thule load bars and mount that to the Matrix. Or something similar... not sure. Will have to see how it works out once i put it together.
Another option im considering is not using the grill hoop and just mounting the lights directly to the Matrix... but, I was also thinking about using the hoop to make a hi-lift mount as well. Decisions decisions!
Last edited by Matt; 05-24-2011 at 06:07 PM.
Definitely for the two top lights,just make a bracket to extend the light mounts away from the hoop.. I'm jealous you got the front skid from 4xguard also! Looks like a nice piece too..
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
There are currently 2 users browsing this thread. (0 members and 2 guests)