would be nice to see if those do get made, I will take a set.
PJMJR508
(Happy Jeep)
I saw that Sal in one of the links Matt had provided. Got me thinking about the best way to do this for now.
2012 Jeep JKU Rubicon - 4-1/2" AEV lift w 35" Toyo's
03 BMW Z4 2.5i ESS Stage 2 Supercharged, Custom Suspension, Stebro Exhaust, Hamann Side Skirts
85 BMW 535is Lowering springs, bilstein sport shocks, extra attitude
Just so you know, I made these mounts as low as possible keeping two things in mind:
1) Clearing the satellite antenna
2) Getting S-hooks from ratchet straps, etc under them.
When measured at the centerline of the roof:
The bottom of my load bar is 7/8" above the roof
The bottom of my load bar is 3/16" above the antenna
The bottom of my Rola cross rail is 1-5/8" above the roof (so you have basically 1.5" to squeeze your arm under there to wash the roof, pass straps, etc)
If I was just using a 2-bar system and didn't need to clear the antenna, I could probably drop it down 1/2" lower.... but it's so low as it is, im not sure it would really make any difference at this point...
Thanks guys
Put the other mount on this morning...
Aaaaaaand the standard poser shots
Looks sick Matt.
2005 WK - MY GARAGE
There are currently 1 users browsing this thread. (0 members and 1 guests)