would be nice to see if those do get made, I will take a set.
would be nice to see if those do get made, I will take a set.
PJMJR508
(Happy Jeep)
I saw that Sal in one of the links Matt had provided. Got me thinking about the best way to do this for now.
2012 Jeep JKU Rubicon - 4-1/2" AEV lift w 35" Toyo's
03 BMW Z4 2.5i ESS Stage 2 Supercharged, Custom Suspension, Stebro Exhaust, Hamann Side Skirts
85 BMW 535is Lowering springs, bilstein sport shocks, extra attitude
Just so you know, I made these mounts as low as possible keeping two things in mind:
1) Clearing the satellite antenna
2) Getting S-hooks from ratchet straps, etc under them.
When measured at the centerline of the roof:
The bottom of my load bar is 7/8" above the roof
The bottom of my load bar is 3/16" above the antenna
The bottom of my Rola cross rail is 1-5/8" above the roof (so you have basically 1.5" to squeeze your arm under there to wash the roof, pass straps, etc)
If I was just using a 2-bar system and didn't need to clear the antenna, I could probably drop it down 1/2" lower.... but it's so low as it is, im not sure it would really make any difference at this point...
There are currently 1 users browsing this thread. (0 members and 1 guests)