Results 1 to 10 of 24

Thread: WANTED: Rock Rails/Sliders Used

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 05-26-2011, 07:24 PM #1
    Tymac
    Tymac is offline
    Lifetime Member Getting Dirty Tymac's Avatar
    Join Date
    Jun 2010
    Location
    Amherst, OH
    Posts
    190
    Rep Power
    14
    Sorry it took so long to reply. I've been busy the last few days.

    Even though it is tough to see in the pics they do not hang lower than your gas tank skid or my 4xguard belly I have.

    I shortened them in the middle as you can see in the pics. It closes the gap between the center bars nicely.

    I bought them on sale 2 summers ago for $99 plus shipping of $52. So for just about $160 (paint, mounting tabs and grade 8 bolts) and about 2 hours of work I have a very functional set of rockrails that I have put to the test on Colorado, Michigan and Ohio trails. They may not be as pretty as others on the market, but I can tell you they are just as tough, if not tougher.
  2. 05-27-2011, 05:55 AM #2
    Holaday07 4.7
    Holaday07 4.7 is offline
    Senior Member Getting Dirty
    Join Date
    May 2011
    Location
    St. Louis MO
    Posts
    1,195
    Rep Power
    15
    Hey I cant thank you enough, I really wanted to get these, and that looks to be something I can do myself. I am not overly concerned on looks, and IMO they look really good, especially compared to what I would be fabbing up.

    thanks again
    2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
  3. 08-02-2011, 08:41 PM #3
    AcidCold
    AcidCold is offline
    Banned Looking for Dirt
    Join Date
    Jul 2011
    Posts
    63
    Rep Power
    0
    Curious on what you are willing to pay for sliders? I have the 4xG sitting in my shop. I don't wheel as much so I took them off since they were rusting. I'm in STL as well.
  4. 08-03-2011, 08:20 AM #4
    Sal-XK
    Sal-XK is offline
    Lifetime Member Getting Dirty Sal-XK's Avatar
    Join Date
    Jun 2010
    Location
    Raeford NC
    Posts
    5,201
    Rep Power
    20
    Quote Originally Posted by AcidCold View Post
    Curious on what you are willing to pay for sliders? I have the 4xG sitting in my shop. I don't wheel as much so I took them off since they were rusting. I'm in STL as well.
    So you have the older ones before the new finishing techniques? Can you post pics so I can see the extent of the rust.
  5. 08-03-2011, 10:09 AM #5
    AcidCold
    AcidCold is offline
    Banned Looking for Dirt
    Join Date
    Jul 2011
    Posts
    63
    Rep Power
    0
    I have the first batch that was made, I will pm you pictures after work. 4x gets a bit touchy when i post pictures.
  6. 08-03-2011, 01:31 PM #6
    Tymac
    Tymac is offline
    Lifetime Member Getting Dirty Tymac's Avatar
    Join Date
    Jun 2010
    Location
    Amherst, OH
    Posts
    190
    Rep Power
    14
    Acid, I thought you signed up here last year. Glad to have you on here.
  7. 08-03-2011, 02:36 PM #7
    AcidCold
    AcidCold is offline
    Banned Looking for Dirt
    Join Date
    Jul 2011
    Posts
    63
    Rep Power
    0
    Quote Originally Posted by Tymac View Post
    Acid, I thought you signed up here last year. Glad to have you on here.
    Never heard of this site before last week, The new SL kit has everyone looking for info anywhere they can find it.
    Thanks for the welcome!
  8. 08-03-2011, 02:52 PM #8
    Holaday07 4.7
    Holaday07 4.7 is offline
    Senior Member Getting Dirty
    Join Date
    May 2011
    Location
    St. Louis MO
    Posts
    1,195
    Rep Power
    15
    Quote Originally Posted by AcidCold View Post
    Never heard of this site before last week, The new SL kit has everyone looking for info anywhere they can find it.
    Thanks for the welcome!
    Seems to be a lot on that here for sure.
    2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rock Sliders
    By bigmaninds in forum Exterior Modification
    Replies: 27
    Last Post: 05-21-2011, 05:29 AM
  2. FS: Original 4xGuard rock rails up for grabs
    By rwmorrisonjr in forum Parts For Sale / Wanted / Trade
    Replies: 11
    Last Post: 05-19-2011, 08:30 AM
  3. anyone using the sliders from kevins offroad on their xk?
    By my4thjeep in forum Exterior Modification
    Replies: 13
    Last Post: 02-02-2011, 10:23 AM
  4. SOLD: Factory Roof Rails
    By superacerc in forum Parts For Sale / Wanted / Trade
    Replies: 7
    Last Post: 10-15-2010, 07:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules