OK, checked the pdf cd manual I got and it claims the PCv for the 4.7 is in the Oil filler neck body, not on mine that I can tell. I don't see any connections on the valve cover either? What am I missing?
Scrtach that, just following the air line from the air to the back of the motor behind the last passenger side ignition coil.
Yes, I asked then I looked again, what a Jackwagon.....
Last edited by hinchcliffe; 06-04-2011 at 06:09 PM.
Thats weird. Mine was located on the drivers side towards the rear of the engine by the fire wall. The only difference is I have an 07 Jeep Commander 4.7 liter. I wonder why they would have changed it. Did you swap in a new PCV valve already?
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I have a 06, 4.7L and its on the Drv side in the very back, just follow the wires for the plugs and is close to the last one by the fire wall, changes mine a few weeks ago 20Min and patience, its hard to get the wrench in there, i'll try to post a pic tonight
I'm still waiting for that pic but then again you didn't promise anything. Descriptions are good but nothing beats a photo for those of us (me) who are mechanically challenged.Originally Posted by jay in nb
HT
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote