I would if the car note would stay the same.........but it won't so I'm stuck.
I would if the car note would stay the same.........but it won't so I'm stuck.
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
I e-mailed Hypertech with some questions and let them know about my experience with tech support........ Here is their response...
"Caleb
I’m sorry about the confusion must have been a miss understanding on the model year. We all use the same source to find out which products we have available for the different model years, makes and engines. We just recently started supporting the 3.7 liter with our Programmers. We support the 2007 and newer only at this time.
Now we do support the 2006 Jeep Commander with the 3.7 with our Speedometer Calibrator part# 752001. This unit calibrates the speedometer only for tire and/or rear axle changes. Maybe the tech mentioned this so you’d know in case that would help.
The vehicle computer calibrations and VIN are different each year and the Programmer 52001 is not programmed to recognize the 2006 model. I recommend going to our website using this link to enter a product request, http://209.12.144.7/requests.php. We use this list to determine the vehicles we support plus you’ll be notified once available. Thanks
Jim"
I did the product request in the link they provided, hopefully if enough owners would do the same we will get a programmer made for us '06ers.
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Spoke to Jet Chips and their programmer will work in our 3.7s.................with a wopping +12hp and +10lbs torque for stage 1..........+17 hp and +13lbs torque for stage 2. I don't see that as a good deal considering the price tag of $250-$300 (depending on where you shop). The cheapest price I found was $228, which makes it out to be $19 per HP for stage 1. Not worth the while in my opinion, plus Jet Chips has some bad reviews on-line.
SO, I ordered the Hypertech speedometer calibrator to correct my tire size issue and hopefully it will correct my "hunting" for gears while on the highway. I will post up in my garage when I recieve it and install it.
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Any news?
2010 Black WK, Tint and Only 1.5" spidertrax spacer so far waiting on the OME HD lift
http://www.DJ-CZ.co (just a hobby)
if you are talking about the speedometer calibrator, here you go------> Hypertech Speedometer
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
bumping this back up. my friend is looking at programmer options for his 2006 3.7L WK....
link above doesn't work due to site changeover. can you add your experience to this thread?
Matt. I don't think anyone has it yet. Ill find that email and post it up when I get home
There are currently 1 users browsing this thread. (0 members and 1 guests)